Kingston Fury Impact DDR4 3200MHZ NB CL20 – 8GB/ 16GB/ 32GB

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.18” (30.00mm)

DESCRIPTION

FURY KF432S20IB/8 is a 1G x 64-bit (8GB) DDR4-3200 CL20 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-3200 at a low latency timing of 20-22-22 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:

FACTORY TIMING PARAMETERS

• Default (Plug N Play): DDR4-3200 CL20-22-22 @1.2V
• XMP Profile #1: DDR4-3200 CL20-22-22 @1.2V
• XMP Profile #2: DDR4-2933 CL17-19-19 @1.2V

SPECIFICATIONS

• CL(IDD) :  20 cycles
• Row Cycle Time (tRCmin) :  45.75ns(min.)
• Refresh to Active/Refresh Command Time (tRFCmin) :  350ns(min.)
• Row Active Time (tRASmin) :  26.25ns(min.)
• UL Rating :  94 V – 0
• Operating Temperature :  0o C to +85o C
• Storage Temperature :  -55o C to +100o C

FEATURES

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.18” (30.00mm)

Weight

• Net Weight (RAM Module Only): Approx. 0.007 – 0.008 kg
• Gross Weight (With Packaging): Approx. 0.02 – 0.05 kg